|Place of Origin:||CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||2000 pcs|
|Packaging Details:||Cartridges (net 300ml) ,24 pieces to a carton.|
|Delivery Time:||4 working days|
|Supply Ability:||20000 pcs/4 working days|
|Features:||One Part Neutral Cure||Color:||Black,white,grey,clear|
|Shelf Life:||12 Months||Volume:||300ml|
|Quality:||High||Application:||Side Or Back Joint Seal Of Mirror. Sealing The Joints Between Glass And Ceramic Tiles, Concrete Walls, Etc.|
acetoxy silicone sealant,
two part silicone sealant
Construction General Purpose Sealant for Mirror Sealing and Bonding
One part neutral cure silicone sealant ideal for mirror installation.
HOW TO USE
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.
Apply GB562 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against joint surfaces. Remove masking tape as soon as the bead is tooled.
GB 562 is a chemical product, not edible, no implantation into body and should be kept away from children.
Cured silicone rubber can be handled without any risk to health.
Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.
Avoid prolonged exposure of skin to uncured silicone sealant.
Good ventilation is necessary for work and cure places.
Complete technical information and literature as well as relevant testings are available from Guibao.
One part, neutral cure, easy to use.
Non-corrosive to the coated materials on the back of mirror.
Long lasting water resistance.
GB 562 is available in clear,white, black and gray.
GB 562 is available in disposable cartridges (net 300ml) ,24 pieces to a carton.
GB 562 is designed to meet or even exceed the requirements of:
China corporation specification.
GB 562 mirror silicone sealant is designed for:
Side or back joint seal of mirror.
Sealing the joints between glass and ceramic tiles, concrete walls, etc.
These values are not intended for use in preparing specifications
|GB/T 13477 (ISO 7390)||Slump(vertical)||mm||≤3||0|
|GB/T 13477 (ISO 8394)||Extrusion rate||ml/min.||≥80||500|
|GB/T 13477 (ASTM D 2377)||Tack free time||h||≤3||0.2|
|GB/T 13477 (ASTM C 794)||Peel strength||N/mm||4.0|
*GB: Chinese National Standard.
ASTM: American Society for Testing and Materials.
ISO: International Standardization Organization.
GB562 should not be applied:
As structural glazing sealant.
To the materials that bleed oils , plasticizers or solvents or uncured resin.
To the surfaces requiring painting on sealant.
To underground joints.
To asphalt surfaces.
When surface temperature below 4℃ or over 50℃.
STORAGE AND SHELF LIFE
GB 562 should be stored in original unopened containers. It has a shelf life of 12 months from the date of manufacture.
The information presented herein is offered in good faith and is believed to be accurate. However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for specific applications.