|Place of Origin:||CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||500ml: 2000pcs|
|Packaging Details:||Sausage :500ml|
|Delivery Time:||6 work days|
|Supply Ability:||20000pcs/6work days|
|Application:||General Purpose, Window And Door||Feather:||Paintable|
|Precaution:||Not Applicable For Outdoor Glass Bonding||Key Words:||MS, Paintable, Low VOC, GP|
Low VOC MS Polymer Adhesive,
Window MS Polymer Adhesive Sealant,
Low VOC ms polymer based sealant
Sealant for window and door MS Polymer Adhesive
Guibao MS558 is specially formulated for
Perimeter seal for aluminum, PVC, wood, steel and other windows and doors
Window and door glass glazing.
One part, neutral cure, excellent adhesion to a wide variety of substrates.
Paintable after curing, compatible with suitable paint systems, good decorative effects.
Excellent UV resistance.
|Item||Technical Data||Testing Method|
|Extrusion rate(4mm,0.2MPA), ml/min||852|
|Vertical, mm||No deformation|
|Tack free time, min||60|
|Elastic recovery rate, %||65|
|23 ℃ Tensile module, MPa||0.5|
|Tensile strength, Mpa||1.0|
|Elongation at break,%||110|
|Movement capability, %||20HM|
|Tensile properties at maintained extension||No failure at 60% extension|
|Adhesion/cohesion properties at variable temperatures||No failure|
|Tensile properties at maintained extension after water immersion||No failure|
STORAGE AND SHELF LIFE
Guibao MS558 should be stored in original unopened containers. It has a shelf life of 9 months from the date of manufacture.
Guibao MS558 should not be applied:
As structural sealant.
To the materials that bleed oils , plasticizers or solvents, such as impregnated wood, oil-based caulks.
In totally confined spaces as sealant requires atmospheric moisture for cure.
To frost laden or damp surfaces.
For continuous water immersion.
When surface temperature below 4℃ or over 50℃.
HOW TO USE
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, surface dirt, protective coatings.
Install back-up materials or joint fillers, setting blocks, spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines.
Apply Guibao MS558 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled.