Mildew Proofing Construction Silicone Sealant / Anti Mould Silicone Sealant

Environmental friendly neutral silicone sealant suited for mildewproofing seal applications for kitchen and bathroom. 

Control of nonconforming product

The control of non-conforming products shall be carried out in accordance with the requirements of document G/CX-25 “Control procedures for non-conforming products”. When non-conforming products are produced, the non-conforming products shall be separately stored and marked to avoid mixing.

The treatment methods for non-conforming products are rework, return to the tank, concession acceptance, degraded use, and scrap. The non-conforming product should be properly recorded and the processing records should be kept.

For batch nonconformities or repeated nonconformities, the technical department shall organize the relevant departments to carry out cause analysis, take corrective measures appropriate to the degree of influence of nonconformity, fill in the corrective action report and execute it according to G/ cx-30 "Corrective Action Control Procedures".

TYPICAL PROPERTIES

These values are not intended for use in preparing specifications

*GB: Chinese National Standard

ASTM: American Society for Testing and Materials

ISO: International Standardization Organization

STORAGE AND SHELF LIFE

GB 561 should be stored in original unopened containers. It has a shelf life of 12 months from the date of manufacture.

LIMITATIONS

GB561 should not be applied:

As structural glazing sealant.

To asphalt surfaces.

To surfaces requiring painting on sealants.

When surface temperature below 4℃ or over 50℃.

HOW TO USE

Surface Preparation

Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

Application Method

Apply GB561 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the joint surfaces.

SAFETY INFORMATION

GB 561 is a chemical product, not edible, no implantation into body and should be kept away from children.

Cured silicone rubber can be handled without any risk to health.

Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.

Avoid prolonged exposure of skin to uncured silicone sealant.

Good ventilation is necessary for work and cure places.

TECHNICAL SERVICES

Complete technical information and literature, adhesion testing and compatibility testing are available from Guibao.

DISCLAIMER

The information presented herein is offered in good faith and is believed to be accurate.However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for specific applications.