|Place of Origin:||CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||4 drums|
|Delivery Time:||4 work days|
|Payment Terms:||T/T, L/C|
|Supply Ability:||60 drums/Week|
|Shelf Life:||6 Months||Material:||Silicone Sealant|
|Keywords:||Automotive Lamp Selant，car Light Sealant，car Lamp Sealant||Feature:||One Part，Stable Performance Over Temperature -55 To +180℃|
|Advantage:||Lamp With Anti-fog Coating|
1061 Automotive Silicone Sealant,
310ml/Cartridge Automotive Silicone Sealant,
Anti Fog Coating 1061 Sealant
One Part Automotive Silicone Sealant for Automotive Lamps with Anti-Fog Coating
Low volatile compound.
Flexible elastomer after curing.
Single component, neutral, cure at RTV(Room Temperature Vulcanization) silicone sealant
Stable performance over temperature -55 to +180℃.
Excellent adhesion to many substrates, such as metal, plastic, ceramic, glass etc.
Waterproofing sealant for automotive lamps.
Excellent adhesion to automotive lamps with anti-fog coating.
Waterproofing sealant for other high-end lamps.
Typical Properties(It should not be used as product standard)
|As supplied||Property||Test Standard|
|Tack Free Time (23℃,50%RH)/min||35||GB/T 13477|
|After Cure ( 7 days at temperature 23℃, relative humidity 45%～55% )||Property||Test Standard|
|Shore Hardness/ Shore A||40||GB/T 531|
|Tensile Strength/ MPa||1.8||GB/T 528|
|Elongation at break/%||450|
GUIBAO 1061 sealant is available in black.
GUIBAO 1061 sealant is supplied in cartridge(net 310ml), or in plastic pail(net 25kg), or in metal pail(net 250kg), or in customized packing.
Storage and Shelf Life
This product should be stored in cool and dry places. Its shelf life is 6 months from the date of manufacture.
How to Use
Keep the surface of substrates dry and clean, without any rust, dust or greasy dirt.
Cleaning solvents include alcohol, acetone etc.
Excellent adhesion to most substrates except PTFE, PE etc.
Extrude sealant with a sealant gun on cleaned surface appropriately and evenly.
If this sealant is extruded into deep section, longer curing time will be expected. If the temperature is low, curing time will also be extended.
For low surface energy material( PP), plasma treatment is required.