Single Component Construction Silicone Sealant Low Mould High Speed Curing

Single Component Construction Silicone Sealant Low Mould High Speed Curing

Features:

TYPICAL PROPERTIES

Application:
The Construction silicone sealant should avoid used in followed conditions:

1 The building materials that may exude grease, plasticizer or solvent, etc

2 The place is absolutely sealed and air-insulated . (curing process needs air)

3 Vulcanized or semi-vulcanized rubber.

4 Mixed sealant

5 The joints which undertake high structural strength, have suffered excessive friction or physical destroy before injecting the sealant.

6 Frosted or humid surfaces.

SAFETY INFORMATION

GB 561 is a chemical product, not edible, no implantation into body and should be kept away from children.

Cured silicone rubber can be handled without any risk to health.

Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.

Avoid prolonged exposure of skin to uncured silicone sealant.

Good ventilation is necessary for work and cure places.

DISCLAIMER

The information presented herein is offered in good faith and is believed to be accurate.However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for specific applications.