|Place of Origin:
Payment & Shipping Terms:
|Minimum Order Quantity:
|Cartridges (net 300ml),24 pieces to a carton.
|4 working days
|20000 pcs/4 working days
|Weather Seal In Spider Fixed Curtain Walls And Total Vision Systems. Art Glass Seal And Bonding. Glass Joint Seal
|Smooth Paste Without Bubble Or Particles
|One Part, Fast Cure
exterior silicone sealant,
water resistant silicone sealant
Acetoxy Silicone Sealant for Total Vision System Silicone Weatherproofing Sealant
High performance acetoxy cure sealant ideally suited for total vision systems and spider –fixed curtain walls
One part, fast cure.
Excellent resistance to temperature extremes, virtually unaffected performance from –50 ℃ to +150 ℃.
Good compatibility with other neutral silicone sealants.
GB 995 is available in translucent.
GB 995 complies with ASTM C 1184-05.
GB 995 is available in cartridges (net 300ml),every 24 pieces to a carton.
GB 995 Silicone Sealant for Total Vision System is a high performance silicone sealant specially designed for:
Weather seal in spider fixed curtain walls and total vision systems.
Art glass seal and bonding.
Glass joint seal.
These values are not intended for use in preparing specifications
|ASTM C 639
|ASTM C 603
|ASTM C 679
|Tack free time
|ASTM C 661 66153113477
|ASTM C 1135
|ASTM C 792
*ASTM: American Society for Testing and Materials.
STORAGE AND SHELF LIFE
GB 995 should be stored in original unopened containers. It has a shelf life of 12 months from the date of manufacture.
GB 995 should not be applied:
To 4-sided and 2-sided curtain walls.
To the materials that bleed oils , plasticizers or solvents, such as impregnated wood, oil-based caulks.
In totally confined spaces as sealant requires atmospheric moisture for cure.
To frost laden or damp surfaces.
For continuous water immersion.
When surface temperature below 4℃ or over 50℃.
For metal coated glass glazing.
HOW TO USE
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.
Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion testing is always recommended.
Apply GB 995 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled.
GB 995 is a chemical product, not edible, no implantation into body and should be kept away from children.
Cured silicone rubber can be handled without any risk to health.
Should uncured silicone sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.
Avoid prolonged periods of exposure of skin to uncured silicone sealant.
Good ventilation is necessary for work and cure places.
Complete technical information and literature, adhesion testing and compatibility testing are available from Guibao.
The information presented herein is offered in good faith and is believed to be accurate. However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for intended specific applications.